Enhance your custom conversion project or upgrade build for a 2004–2007 Chevrolet Colorado or GMC Canyon by adding factory-option functionalities of RPO codes T96 (fog lights) and AU0 (remote keyless entry). This service programs your vehicle’s Body Control Module (BCM) to enable these features.
How Our Service Works
-
Ship Your BCM: Send your original BCM securely packaged to our programming facility.
-
Specify Features: Choose T96, AU0, or both for programming.
-
Programming & Testing: We program your BCM to support the selected feature(s) and perform internal testing.
-
Return & Install: Your BCM is shipped back ready to install. Connect the appropriate hardware and verify operation.
Supported Vehicles
-
Chevrolet Colorado: 2004–2007
-
GMC Canyon: 2004–2007
Supported Features
-
T96 Fog Lights: Activates BCM control for front fog lamps. Requires compatible fog light assemblies, wiring harness or switch provisions, and a properly grounded/fused circuit.
-
AU0 Remote Keyless Entry: Programs the BCM to accept remote key fob signals, enabling door lock/unlock. Panic or alarm functions may work depending on installed hardware.
Service Requirements
-
Hardware Required: BCM programming alone does not include physical hardware. Ensure all required components (fog lights, wiring, key fobs, receivers) are installed or compatible before programming.
-
Matching BCM: You must provide your original BCM. Replacement units may require additional verification.
-
Warranty Note: Opening or reprogramming the BCM may void existing manufacturer warranties.
Important Notes
-
This service enables functionality only. It does not install hardware.
-
Verify all wiring and component compatibility to prevent faults or non-functional features.
-
One or both features (T96, AU0) can be programmed based on your selection.
FAQ
Do I need to send any hardware?
No. Only your original BCM is required. Make sure the hardware for the feature(s) is already installed or compatible.
Can I program both T96 and AU0 at the same time?
Yes. The BCM can be programmed for one or both features in a single service.
Will this work on any other Chevrolet or GMC models?
This service is specific to 2004–2007 Chevrolet Colorado and GMC Canyon. Contact us for other models.
Do I need to do any additional programming after receiving the BCM?
No. Once returned, the BCM is plug-and-play. Simply install it and connect the appropriate hardware.
What if my BCM has a warranty?
Programming may void any existing warranty on your BCM.